Models
NX-01
1701-D
Borg
Scale: 1:350
Scale: 1:700
Scale: 1:5600
Web Photo
Web Photo
My Photo
Copyright 2025 Queenidog - All Rights Reserved
T-800
Scale: 1:1
Web Photo
Dracula's Castle
Klingon Bird of Prey
Romulan War Bird
SaturnV
R2D2
I started this modeling thing as a way to relax from all the projects I had to complete which required too- HARD thinking!
I printed the NX-01 Enterprise as a trial to see how 3D printed models would work and come together. Of course I had to add lights to make it "my own". Buoyed by somewhat success, I decided to try the 1701-D, the Enterprise from Star Trek: The Next Generation (ST:TNG). Scales were different and while I could have scaled the 1701-D down, I decided to print at full scale. The model is HUGE! The disk is almost 24 inches across.
Simultaneously I obtained and printed a Borg cube, at 60% size since 100% was 18" cube...very big. In the Star Trek world, the Borg was a huge ship, something like 3 km "cubed". See photo below.
All model 3D STL files (except Dracula's Castle) were obtained from Gambody.com where you may purchase the 3D-printable files. I WILL NOT PROVIDE ANY STLs. They are protected property.
Currently (May 2026), the NX-01, 1701-D and Borg are complete...with lasers, photon torpedoes, sound, etc. I have a remote control that controls the features of both and I have a battle planned. Just needs programming.
Dracula's Castle itself is done, with added lights. I'm creating a diorama around it, with trees, rocks, stone fence, impaled skeletons and "real" lightning and thunder, and other sound effects. I modified the code for the Borg/Enterprise remote control so I can use it for the Castle.
I printed the NX-01 Enterprise as a trial to see how 3D printed models would work and come together. Of course I had to add lights to make it "my own". Buoyed by somewhat success, I decided to try the 1701-D, the Enterprise from Star Trek: The Next Generation (ST:TNG). Scales were different and while I could have scaled the 1701-D down, I decided to print at full scale. The model is HUGE! The disk is almost 24 inches across.
Simultaneously I obtained and printed a Borg cube, at 60% size since 100% was 18" cube...very big. In the Star Trek world, the Borg was a huge ship, something like 3 km "cubed". See photo below.
All model 3D STL files (except Dracula's Castle) were obtained from Gambody.com where you may purchase the 3D-printable files. I WILL NOT PROVIDE ANY STLs. They are protected property.
Currently (May 2026), the NX-01, 1701-D and Borg are complete...with lasers, photon torpedoes, sound, etc. I have a remote control that controls the features of both and I have a battle planned. Just needs programming.
Dracula's Castle itself is done, with added lights. I'm creating a diorama around it, with trees, rocks, stone fence, impaled skeletons and "real" lightning and thunder, and other sound effects. I modified the code for the Borg/Enterprise remote control so I can use it for the Castle.